Automation That Thinks — Visually
Three Products. One Platform.
CeresFlows isn't just a controller — it's a complete farm management system. Use all three together, or each one independently.
Automation Engine
Visual flow editor, scheduling, hardware control, safety systems, and AI-powered monitoring.
Explore ProductNutrition Lab
NewRecipe calculator, PPM optimizer, auto-mix algorithm, inventory management, and batch preparation.
Open Nutrition LabFarm Diary
NewDigital logbook with structured measurements, actions, observations, and sensor integration.
Open Farm DiaryMost systems only control hardware. CeresFlows manages your entire operation — from recipe design to daily logging to automated execution.
Automation Shouldn't Be This Hard
Most solutions are either too rigid to customize or too complex to actually use. There has to be a better way.
Too Rigid to Adapt
Most controllers do one thing and one thing only. Change your setup, add a new sensor, or tweak your workflow — and you're back to square one, calling a technician or buying new hardware.
Too Many Devices, No Common Language
Your pH sensor speaks one protocol. Your flow meter speaks another. Getting them to work together usually means buying a system that supports all of them — or writing code to bridge the gaps yourself.
Too Complex to Build
Automation logic shouldn't require programming skills. But most platforms either oversimplify — leaving you with no real control — or overwhelm you with configuration files and no visual feedback.This Is What Changes.
This Is What Changes.
One platform replaces the guesswork, the manual checks, and the late-night troubleshooting.
BEFORE
- ✕ Check sensors manually — every single day
- ✕ Adjust nutrients and pH by hand
- ✕ Find out something went wrong after it already did
- ✕ Hardware that doesn't talk to each other
- ✕ Guesswork instead of data
WITH CERESFLOWS
- Live sensor readings, always visibleAutomated dosing and pH correction, every cycleAlerts before a problem becomes a lossAny device, any protocol — one platformFull execution history and AI-generated reports
“This is what your grow looks like when CeresFlows is the brain.”
Up and Running in Four Steps
No specialist required. No cloud setup. Just connect, build, and grow.
Get CeresFlows running on any hardware in minutes — Windows, Linux, or a Raspberry Pi. One file. One click. Running.
Add your controllers, define your sensors and actuators. Use the built-in device library or build a custom driver in seconds — no code required.
Design your automation logic visually using the flow editor. Combine flows into programs, set schedules, and define conditions that respond to real sensor data.
Watch your grow in real time from the dashboard. Get Telegram alerts when something needs attention. Everything else runs itself.
Everything You Need. Nothing You Don't.
CeresFlows is built from the ground up for growing environments — every feature exists for a reason.
Automation & Control
- ✓ Visual drag-and-drop flow editor
- ✓ Conditional branching & loops
- ✓ Schedule-based programs
- ✓ Condition-driven triggers
- ✓ Reusable flows across programs
- ✓ Live flow testing & debugger
- ✓ Precise mL dosing control
- ✓ Multi-zone support
- ✓ Variable Manager
Hardware & Devices
- ✓ Any MCU board — Arduino, ESP32
- ✓ I²C, UART, Modbus, SPI, OneWire, Analog, Digital
- ✓ Built-in device library
- ✓ Visual driver/template builder
- ✓ USB, Wi-Fi, MQTT connectivity
- ✓ Network auto-discovery
- ✓ Firmware builder
- ✓ Export/import driver templates
- ✓ Demo environment included
Monitoring & Intelligence
- ✓ Real-time sensor dashboard
- ✓ Daily execution journal
- ✓ Sensor Lab — free-form time-series charts
- ✓ Insight Engine — pattern correlation
- ✓ Resource & consumption tracking
- ✓ Energy & cost monitoring
- ✓ AI-generated daily reports
- ✓ Built-in AI Assistant (chat)
- ✓ Telegram alerts & commands
Safety & Architecture
- ✓ Hardware watchdog (TTL)
- ✓ Crash recovery & zombie prevention
- ✓ Frozen sensor detection
- ✓ Trigger overrides & emergency stop
- ✓ Full audit trail
- ✓ 100% local — no cloud
- ✓ Simulation Mode ("Time Warp")
- ✓ Full backup & restore
- ✓ Runs on Windows, Linux, Raspberry Pi
Curious about how it all fits together?
We've built a dedicated discovery portal to help you understand the CeresFlows ecosystem — from hardware configuration to cloud-free local automation.
Your hardware is ready. Is your grow?
No cloud account. No credit card. No vendor lock-in.
Product
Explore every feature — flow editor, safety systems, AI assistant, and more.
Solutions
Find out how CeresFlows fits your setup — from a single sensor to a full commercial grow.
Documentation
Everything you need to get up and running — step by step, no experience required.
Pricing
Simple, flexible plans. Start free and scale when you're ready.